S32550 plate

S32550 is also called FERRALIUM 255, F61. It is finding many cost effective applications in the chemical, marine, metallurgical, municipal sanitation, plastics, oil and gas, petrochemical, pollution control, wet phosphoric acid, paper making and metalworking industries. Called "super" because it is more alloyed than ordinary stainless steels and has superior corrosion resistance, FERRALIUM 255 is being used in areas where conventional stainless' are inadequate or, at best marginal. One good example s in the paper industry which was hit with an epidemic of corrosion problems when environmental laws forced recycling of process liquids In closed systems, chemicals such as chlorides can build up to highly corrosive concentrations over time. Paper makers have found that ordinary stainless equipment, which had previously given good service, was no longer adequate for many applications. FERRALIUM 255 is a duplex alloy with a high strength to weight ratio with superior abrasion and cavitation resistance. Resistance to chloride SCC, as well as crevice corrosion and pitting. Good ductility with a high fatigue strength in marine applications. Twice the yield strength of Alloy 20, and stronger than Duplex 2205. An excellent 40°C critical pitting temperature (ASTM G48-Method A), twice that of Alloy 2205.

Products Details

 

C

Si

Mn

P

S

Cr

Ni

Mo

Cu

N

Pren

Min

 

 

 

 

 

24.0

4.5

2.9

1.5

0.1

40

Max

0.04

1.0

1.5

0.04

0.03

27.0

6.5

3.9

2.5

0.25

 

(PREN = % Cr + 3.3% Mo + 16% N)FERRALIUM 255 is a cost effective alternative to materials such as the nickel alloys, 20 type alloys, brass and bronze. Marine environments have long been the domain of admiralty bronze. Alloy 255 is replacing admiralty bronze, and the nickel alloys, in offshore platforms, deck hardware, rudders and shafting. Alloy 255 is also making inroads in "borderline" corrosion applications where the nickel alloys and high performance alloys have been used but may not have been absolutely necessary. In some instances, it has even been used to replace high performance Ni-Cr-Mo-F-Cu alloys in the phosphoric acid industry. Valves, pumps, shafts, marine environments, Applications in down-hole, waste water, polycarbonate production, and demineralized water production.Condition: Solution Annealed and Water Quenched.

U.T.S

110 KSI Min

(760 N/mm2)

0.2% Proof Stress

80 KSI Min

(550 N/mm2)

Elongation

15 %

 

CVN Impacts @ -46°C (-50°F)

45 Joules

(33 ft-lbf)

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours