| Element | Content (%) |
| Chromium, Cr | 18-20 |
| Nickel, Ni | 8-12 |
| Manganese, Mn | 2 max |
| Silicon, Si | 1 max |
| Nitrogen, N | 0.1-0.16 |
| Phosphorous, P | 0.045 max |
| Carbon, C | 0.03 max |
| Sulfur, S | 0.03 max |
| Iron, Fe | Remainder |
| Properties | Metric | Imperial |
| Tensile strength | 515 MPa | 74694 psi |
| Yield strength | 205 MPa | 29732 psi |
| Elongation at break (in 50 mm) | 40% | 40% |
| Hardness, Brinell | 217 | 217 |
| Hardness, Rockwell B | 95 | 95 |
| 304LN stainless steel plate sizes and specifications | |
| Grade | 304LN |
| Cold rolled stainless steel plate | Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm,Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc |
| Hot rolled stainless steel sheet | Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling |
| Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,BS 1449, DN17441, G4304LN |
| Stainless steel plate | Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling |
| 304LN stainless steel strip sizes and specifications | |
| Grade | 304LN |
| Cold rolled stainless steel strip | Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc |
| Hot rolled stainless steel strip | Thickness: 3.0mm - 16mm, Width: 10mm - 900mmSurface: No.1/pickling |
| Stainless steel foil | Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B |
| Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4304LN |
| 304LN stainless steel coil sizes and specifications | |
| Grade | 304LN |
| Cold rolled stainless steel coil | Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc |
| Hot rolled stainless steel coil | Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mmSurface: No.1/pickling |
| Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4304LN |
| 304LN stainless steel pipe sizes and specifications | |
| Grade | 304LN |
| Stainless steel seamless pipe | Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm |
| Stainless steel welded pipe | Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm |
| Stainless steel capillary pipe | Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm |
| Stainless steel welded sanitary pipe | Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm |
| Stainless steel seamless sanitary pipe | Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm |
| Stainless steel square pipe | Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm |
| Stainless steel rectangular pipe | Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm |
| Stainless steel coil pipe | Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm |
| Standard | American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85·European Standard: EN10216-5, EN10216-2Japanese Standard: JIS G3463-2006, JISG3459-2012Russian Standard: GOST 9941-81 |
| 304LN stainless steel profile sizes and specifications | |
| Grade | 304LN |
| Specification | EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO |
| Standard | ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 . |
| Stainless steel round Bar | Diameter: 2mm - 600mm |
| Stainless steel bright Bar | Diameter: 2mm - 600mm |
| Stainless steel hex Bar | Dimension: 6mm - 80mm |
| Stainless steel square bar | Dimension: 3.0 - 180mm |
| Stainless steel flat bar | Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm |
| Stainless steel angle bar | as requirements |
| Length | Normally 6m, or produce as requirements |
| Surface | Black, Bright. Peeled and Polished, Solution annealed. |
| Delivery condition | cold drawn, hot rolled, forged, grinding, centerless grinding |
| Tolerance | H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements |