Nickel	Balance
Aluminum	0.5 max.
Carbon	0.03 max.
Chromium	8
Iron	2 max.
Manganese	0.8 max.
Molybdenum	22.5
Tungsten	6

Test Temperature		Yield Strength, 0.2% Offset		Ultimate Tensile Strength		Elongation	Reduction of Area
°F	°C	ksi	MPa	ksi	MPa	%	%
RT	RT	121.2	836	195.0	1345	34	37
200	93	116.3	802	190.3	1312	39	41
400	204	110.3	761	181.6	1252	39	45
600	316	107.9	744	175.4	1209	41	44
800	427	100.0	689	170.4	1175	41	46
1000	538	99.3	685	164.2	1132	38	43
1100	593	97.5	672	156.3	1078	32	32
1200	649	93.8	647	141.4	975	21	24
1300	704	84.8	585	125.6	866	18	20
1400	760	67.2	463	105.0	696	44	37
1500	816	37.1	256	72.0	463	106	70
1600	871	34.8	240	54.1	354	124	84
1700	927	38.2*	263*	42.4*	208*	161*	89*
1800	983	24.0	165	30.4	210	141	94

Haynes 244 available sizes and specifications
Grade	Haynes 244
Nickel plate	Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm
Nickel strip/ nickel foil	Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm
Nickel coil	Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm
Nickel pipe	Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm
Nickel Capillary Pipe	Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm
Nickel bar	Diameter: Ф4mm - Ф600mm
Nickel wire rod	Diameter：Ф0.01mm - Ф6mm

HAYNES 242 alloy combines properties which make it ideally suited for a variety of component applications in aero and industrial gas turbine engines. It may be used for seal rings, containment rings, duct segments, casings, fasteners, rocket nozzles, pumps, and many others. In the chemical process industry, 242 alloy will find use in high-temperature hydrofluoric acid vapor-containing processes as a consequence of its excellent resistance to that environment. The alloy also displays excellent resistance to high-temperature fluoride salt mixtures. The high strength and fluorine environment-resistance of 242 alloy has also been shown to provide for excellent service in fluoroelastomer process equipment, such as extrusion screws.HAYNES 244 alloy is furnished in the annealed condition, unless otherwise specified. The alloy is usually annealed in the range of 2000-2100°F (1093-1149°C), depending upon specific requirements, followed by an air cool (or more rapid cooling) before aging. A water quench is recommended for heavy section components. Aging is performed by holding at 1400°F (760°C) for 16 hours, furnace cooling to 1200°F (649°C) and holding for 32 hours, followed by air cool.