Manufacture hot rolled 316/316L stainless steel plate, 316L cold rolled stainless steel coil supplier

316/316L (UNS S31600/S31603) is a chromium-nickel molybdenum austenitic stainless steel developed to provide improved corrosion resistance to 304/304L in moderately corrosive environments. It is often utilized in process streams containing chlorides or halides. The addition of molybdenum improves general corrosion and chloride pitting resistance. It also provides higher creep, stress-to-rupture and tensile strength at elevated temperatures. It is common practice for 316L to be dual certified as 316 and 316L. The low carbon chemistry of 316L combined with an addition of nitrogen enables 316L to meet the mechanical properties of 316. 316/316L resists atmospheric corrosion, as well as, moderately oxidizing and reducing environments. It also resists corrosion in polluted marine atmospheres. The alloy has excellent resistance to intergranular corrosion in the as-welded condition. 316/316L has excellent strength and toughness at cryogenic temperatures. 316/316L is non-magnetic in the annealed condition, but can become slightly magnetic as a result of cold working or welding. It can be easily welded and processed by standard shop fabrication practices.
send email to us

Products Details

Weight % (all values are maximum unless a range is otherwise indicated)
Element 316 316L
Cr 16-18 16-18
Ni 10-14 10-14
Mo 2.0-3.0 2.0-3.0
C 0.08 max 0.03 max
Mn 2.0 max 2.0 max
P 0.045 max 0.045 max
S 0.03 max 0.03 max
Si 0.75 max 0.75 max
Ni 0.1 max 0.1 max
▪ Food preparation equipment, especially in chloride environments ▪ Chemical processing, equipment ▪ Laboratory benches and equipment ▪ Rubber, plastics, pulp & paper machinery ▪ Pollution control equipment ▪ Boat fittings, value and pump trim ▪ Heat exchangers ▪ Pharmaceutical and textile industries ▪ Condensers, evaporators and tanks▪ ASTM/ASME: UNS S31600 / S31603 ▪ EURONORM: X1 CrNiMo 17 12 2 / X3 CrNiMo 17 12 2 ▪ AFNOR: Z 6 CND 17-11 / Z 2 CND 17-12 ▪ DIN: 1.4401 / 1.4404▪ Generally more resistant than 304 in range of atmospheric environments and many corrosive media due to the increased chromium ▪ and molybdenum content. ▪ Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 122°F (50°C). ▪ Considered resistant to potable water with up to about 1000mg/L chlorides at ambient temperatures, reducing to about 500mg/L at ▪ 140°F (60°C). ▪ Usually regarded as the “marine grade stainless steel” – but is not resistant to warm sea water.
Typical 316 316L
0.2% Offset Yield Strength, ksi 44 30 min 25 min
, ksi 85 75 min 70min
Elongation in 2 inches, % 56 40min 40 min
Reduction in Area, % 69 - -
Hardness, Rockwell B 81 95 max 95 max
316/316L can be easily welded and processed by standard shop fabrication practices. 
316/316L stainless steel strip sizes and specifications
Grade 316/316L
Cold rolled stainless steel strip Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel strip Thickness: 3.0mm - 16mm, Width: 10mm - 900mmSurface: No.1/pickling
Stainless steel foil Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,  BS 1449, DN17441, G4305
 
316/316L stainless steel coil sizes and specifications
Grade 316/316L
Cold rolled stainless steel coil Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel coil Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mmSurface: No.1/pickling
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,   BS 1449, DN17441, G4305
316/316L stainless steel plate sizes and specifications
Grade 316/316L
Cold rolled stainless steel plate Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm,Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel sheet Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling
Standard ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,BS 1449, DN17441, G4305
Stainless steel plate Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling
 
316/316L stainless steel pipe sizes and specifications
Grade 316/316L
Stainless steel seamless pipe Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm
Stainless steel welded pipe Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm
Stainless steel capillary pipe Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm
Stainless steel welded sanitary pipe Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm
Stainless steel seamless sanitary pipe Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm
Stainless steel square pipe Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel rectangular pipe Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel coil pipe Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm
Standard American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85·European Standard: EN10216-5, EN10216-2Japanese Standard: JIS G3463-2006, JISG3459-2012Russian Standard: GOST 9941-81 
 
316/316L stainless steel profile sizes and specifications
Grade 316/316L
Specification EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO
Standard ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 .
Stainless steel round Bar Diameter: 2mm - 600mm
Stainless steel bright Bar Diameter: 2mm - 600mm
Stainless steel hex Bar Dimension: 6mm - 80mm
Stainless steel square bar Dimension: 3.0 - 180mm
Stainless steel flat bar Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm
Stainless steel angle bar as requirements
Length Normally 6m, or produce as requirements
Surface Black, Bright. Peeled and Polished, Solution annealed.
Delivery condition cold drawn, hot rolled, forged, grinding, centerless grinding
Tolerance H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements
Working temperatures of 1700 – 2200°F (927 – 1204°C) are recommended for most hot working processes. For maximum corrosion resistance, the material should be annealed at 1900°F (1038°C) minimum and water quenched or rapidly cooled by other means after hot working.The alloy is quite ductile and forms easily. Cold working operations will increase the strength and hardness of the alloy and might leave it slightly magnetic. 316/316L is subject to work hardening during deformation and is subject to chip breaking. The best machining results are achieved with slower speeds, heavier feeds, excellent lubrication, sharp tooling and powerful rigid equipment.

Previous:Nimonic 86 nickel round bar, Nimonic 86 plate, Nimonic 86 sheet price

Next:Hastelloy B-3 nickel alloy sheet, Hastelloy B3 pipe price, Hastelloy B3 bar in stock

Nickel Pipe, Monel Pipe, 1 Steel Tubing, seamless stainless steel pipe manufacturer, Titanium Seamless Tube, Waspaloy plate, Stainless Steel Trim Strips, Stainless Steel Welded Pipe, 321 Stainless Steel Sheet, Sch 10s Pipe,

Featured Products

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours