Monel 404 has low magnetic permeability and low Curie temperature. Because its low magnetic permeability is not significantly affected by processing and fabrication, it is particularly suitable for electronic parts.

Density, g/cm3	Melting Point, ℃	Tensile Strength, MPa	Yield Strength, MPa	ELongation, %	Hardness, HRB
8.91	1300-1350	550	185	36	/

Alloy	C	Si	Mn	P	S	Ni	Cu	Al	Fe
Monel 404	≤0.15	≤0.10	≤0.10	≤0.020	≤0.030	52.0-57.0	Bal	≤0.05	≤0.50

Trademark	GB	GOST	ASTM	UNS	DIN	W.Nr.	NF	BS
Monel 404	–	–	Monel 404	N04404	–	2.4867	–	–

Rod, Bar, Wire and Forgings	ASTM B164, ASME SB164, DIN 17752
Plate, Sheet and Strip	DIN 17750
Pipe and Tube	DIN 17751
Welding Product	–
Others	ASTM B366, ASME SB366, DIN 17743

Monel 404 available sizes and specifications
Grade	Monel 404
Nickel plate	Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm
Nickel strip/ nickel foil	Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm
Nickel coil	Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm
Nickel pipe	Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm
Nickel Capillary Pipe	Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm
Nickel bar	Diameter: Ф4mm - Ф600mm
Nickel wire rod	Diameter：Ф0.01mm - Ф6mm

▪ Electronic and electrical devices ▪ Marine fixtures ▪ Chemical processing equipment ▪ Gasoline tanks ▪ Boiler feed water heaters ▪ Heat exchangers