Monel R405 plate, alloy R-405 supply,sale monel R-405 pipe, Monel R-405 wire rod

Monel R-405 (UNS N04405 / W.Nr. 2.4360, 2.4361 the free-machining version of Monel 400. A controlled amount of sulfur is added to the alloy to provide sulfide inclusions that act as chip breakers during machining. A Ni-Cu alloy with high strength and excellent resistance to a range of media including seawater, hydrofluoric and sulfuric acids, and alkalies. Used in marine and offshore engineering, chemical andhydrocarbon processing equipement, valves, pumps, shafts, fittings, fasteners, and heat exchangers.

Products Details

▪ Resistant to seawater and steam at high temperatures ▪ Excellent resistance to rapidly flowing brackish water or seawater ▪ Excellent resistance to stress corrosion cracking in most freshwaters ▪ Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated ▪ Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids ▪ Excellent resistance to neutral and alkaline salt ▪ Resistance to chloride induced stress corrosion cracking ▪ Good mechanical properties from sub-zero temperatures up to 1020° F ▪ High resistance to alkalis
Trademark GB GOST ASTM UNS DIN W.Nr. NF BS
Monel R-405 MCu-28-1.5-1.8 НМЖМц28-2.5-1.5 Monel R-405 N04405 NiCu30Fe 2.43602.4361 Nu30 Ni68Cu28FeNA12
Alloy C Si Mn P S Ni Cu Fe
Monel R-405 ≤0.30 ≤0.50 ≤2.00 ≤0.030 0.025-0.060 ≥63.0 28.0-34.0 ≤2.50
Density, g/cm3 Melting Point, ℃ Tensile Strength, MPa Yield Strength, MPa ELongation, % Hardness, HRB
8.5 1315-1350 1100 790 20 /
Monel R-405 available sizes and specifications
Grade Monel R-405
Nickel plate Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm
Nickel strip/ nickel foil Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm
Nickel coil Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm
Nickel pipe Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm
Nickel Capillary Pipe Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm
Nickel bar Diameter: Ф4mm - Ф600mm
Nickel wire rod Diameter:Ф0.01mm - Ф6mm
Rod, Bar, Wire and Forgings ASTM B865, ASME SB865, DIN 17752, DIN 17753, DIN 17754
Plate, Sheet and Strip DIN 17750
Pipe and Tube DIN 17751
Welding Product
Others ASTM B366, ASME SB366, DIN 17743
▪ Marine engineering ▪ Chemical and hydrocarbon processing equipment ▪ Gasoline and freshwater tanks ▪ Crude petroleum stills ▪ De-aerating heaters ▪ Boiler feed water heaters and other heat exchangers ▪ Valves, pumps, shafts, fittings, and fasteners ▪ Industrial heat exchangers ▪ Chlorinated solvents ▪ Crude oil distillation towers

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours