Get The Best Quality Titanium Rings Directly From Our Factory

Titanium ring

Large titanium rings are manufactured by the large grinding ring machine, small titanium rings can be achieved by forging machine. As a company with more than 20 years of production experience, we have a series of rigorous forging process and operation manual, including the heating steps, heating time and heat preservation time. The 35MN and 16MN rapid forging machine guaranteed the multiple forging in the suitable temperature range, and changed the internal physical structure of titanium rings. Greatly improved the quality of our products. In addition to titanium ring, we also provide the production of titanium disc, titanium block etc.

Grade	Condition	OD (mm)	ID (mm)	H (mm)	WT (mm)
Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11,Gr12, Gr16, Gr23	Annealed	200-400	100-300	35-120	40-150
		＞400-700	150-500	40-160	40-250
		＞700-900	300-700	50-180	40-300
		＞900-1300	70-250	70-250	40-400

Chemical composition test Physical properties test Appearance defects inspection Ultrasonic flaw detection Eddy current testing Macroscopic examination

Grade	Chemical composition, weight percent (%)
Grade	C≤	O≤	N≤	H≤	Fe≤	Al	V	Pb	Ru	Ni	Mo	OtherMax each	OtherMax total
Gr.1	0.08	0.18	0.03	0.015	0.20	-	-	-	-	-	-	0.1	0.4
Gr.2	0.08	0.25	0.03	0.015	0.30	-	-	-	-	-	-	0.1	0.4
Gr.4	0.08	0.25	0.03	0.015	0.30	-	-	-	-	-	-	0.1	0.4
Gr.5	0.08	0.20	0.05	0.015	0.40	5.5-6.75	3.5-4.5	-	-		-	0.1	0.4
Gr.7	0.08	0.25	0.03	0.015	0.30	-	-	0.12-0.25	-	0.12-0.25	-	0.1	0.4
Gr.9	0.08	0.15	0.03	0.015	0.25	2.5- 3.5	2.0- 3.0	-	-	-	-	0.1	0.4
Gr.11	0.08	0.18	0.03	0.15	0.2	-	-	0.12-0.25	-	-	-	0.1	0.4
Gr.12	0.08	0.25	0.03	0.15	0.3	-	-	-	-	0.6- 0.9	0.2-0.4	0.1	0.4
Gr.16	0.08	0.25	0.03	0.15	0.3	-	-	0.04- 0.08	-	-	-	0.1	0.4
Gr.23	0.08	0.13	0.03	0.125	0.25	5.5- 6.5	3.5- 4.5		-	-	-	0.1	0.1

In order to avoid the titanium disc has any collision in transit or damage, usually wrapped with pearl cotton (expandable polyethylene), then packed into wooden case.

Material	CP titanium，titanium alloy
Grade	Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc
Size	OD：200～1300mm, ID： 100～900mm, H： 35～250mm, WT： 40～400mm
Standard	ASTM B381.
Status	Hot forging

Grade	Mechanical Properties
	Tensile Strength Min		Yield Strength (0.2% offset)				Elongation in 50mm Min(%)
	Ksi	MPa	Min		Max
	Ksi	MPa	Ksi	MPa	Ksi	MPa
Gr.1	35	240	20	138	45	310	24
Gr.2	50	345	40	275	65	450	20
Gr.4	80	550	70	483	95	655	15
Gr.5	130	895	120	828	-	-	10
Gr.7	50	345	40	275	65	450	20
Gr.9	90	620	70	483	-	-	15
Gr.11	35	240	20	138	45	310	24
Gr.12	70	483	50	345	-	-	18
Gr.16	50	345	40	275	65	450	20
Gr.23	120	828	110	759	-	-	10

Titanium ring

Products Details

Featured Products

Contact us